1. If there is sludge in the transportation process of the automatic loading mixer, it is necessary to determine whether there is any problem with the cleaning of the automatic loading mixer.

2.自動上料攪拌車液壓系統或發動機故障的處理：

2. Handling of hydraulic system or engine failure of automatic feeding mixer:

（1）打開自動上料攪拌車攪拌箱檢查孔的蓋子，松開電機上高壓軟管的管接頭，旋轉攪拌筒，向下傾斜攪拌筒的檢查孔，然后排出混凝土攪拌汽缸孔的檢查；

(1) Open the cover of the inspection hole of the mixing tank of the automatic loading mixer, loosen the pipe joint of the high-pressure hose on the motor, rotate the mixing drum, tilt the inspection hole of the mixing drum downward, and then discharge the concrete mixing cylinder hole for inspection;

（2）從電動機上拆下故障車輛的高壓軟管，連接高壓軟管以進行救援，將另一端連接至救援車輛的油泵，并將應急返回軟管的一端連接至有故障的汽車的馬達排水管?；赜凸艿牧硪欢诉B接到救援自動上料攪拌車的油泵回油口。救援車輛用于控制故障車輛的混合滾筒的旋轉并排出。

(2) Remove the high-pressure hose of the vehicle with fault from the motor, connect the high-pressure hose for rescue, connect the other end to the oil pump of the rescue vehicle, and connect one end of the emergency return hose to the motor drain pipe of the vehicle with fault. The other end of the oil return pipe is connected to the oil return port of the oil pump of the rescue automatic feeding mixer. The rescue vehicle is used to control the rotation and discharge of the mixing drum of the faulty vehicle.

3.如果自動上料攪拌車電動機出現故障，則處理會更簡單。您可以卸下救援車輛的電動機并將其安裝在故障車輛上，然后連接各種油管，然后啟動救援車輛以控制故障車輛攪拌筒的旋轉并排出混凝土。

3. If the motor of the automatic feeding mixer fails, the handling will be simpler. You can remove the motor of the rescue vehicle and install it on the faulty vehicle, then connect various oil pipes, and then start the rescue vehicle to control the rotation of the mixing drum of the faulty vehicle and discharge the concrete.