The automatic feed mixer will overheat the engine on normal roads. Slow down as soon as possible, drive the car in the shade of trees, or park the car in a relatively cool place, but don't put out the fire quickly.

打開引擎蓋，以怠速旋轉引擎，然后等待直到引擎溫度逐漸恢復正常。發動機水溫恢復正常后，發動機將停止。請稍等片刻，使發動機水溫冷卻下來，然后檢查發動機冷卻水量。

Open the hood, rotate the engine at idle speed, and then wait until the engine temperature gradually returns to normal. When the engine water temperature returns to normal, the engine will stop. Please wait a moment to cool down the engine water temperature, and then check the engine cooling water volume.

此時，自動水混合器的冷卻水量可能明顯不足。補充規定量的冷卻水后，檢查冷卻系統是否有其他異常情況，啟動發動機，然后繼續運行。另外，檢查水箱百葉窗沒有被異物堵塞，風扇葉片是否運轉，發動機皮帶沒有打滑以及發動機水泵是否運轉。

At this time, the cooling water volume of the automatic water mixer may be significantly insufficient. After replenishing the specified amount of cooling water, check whether there are other abnormalities in the cooling system, start the engine, and then continue to run. In addition, check whether the shutter of the water tank is not blocked by foreign matters, whether the fan blade is running, whether the engine belt is not slipping and whether the engine water pump is running.

上述編輯介紹的相關知識內容是，自動混水機的發動機水溫處理方法過高，希望您能對此有所了解。如果遇到此問題，則可以使用上述方法成功解決它。

The relevant knowledge introduced by the above editor is that the treatment method of engine water temperature of automatic water mixer is too high. I hope you can understand this. If you encounter this problem, you can use the above method to successfully solve it.

自上料混凝土攪拌罐車水溫的處理方法你明白了嗎？

Do you understand the treatment method of water temperature of self loading concrete mixing tank truck?